Please select the shape of your project and then enter in the dimensions to be provided with an estimate of the amount of readymix you need.
Buy a mix designed to protect structures from water penetration as well as retaining water within required areas.
Watertight is a specialised concrete mix used to protect structures from water penetration and retaining water within required areas. As well as being suitable for a wide range of applications our watertight readymix is easier to install vs traditional joining methods, reducing your time onsite and installation costs.
Attribute(s) | Farmcrete | Highpave | Watertight | Foundationcrete |
---|---|---|---|---|
Resistant to Frost damage | ||||
Impact & Abrasion Resistant | ||||
Fibre Reinforced | ||||
Waterproof Structures | ||||
Reduced CO2 Mix (on request) |
Easier to install vs traditional joining methods
Is not sensitive to weather conditions unlike membrane solutions
High early strength by request: Less than 30 N/mm2 at 24 hours
Swimming pools
Domestic basements
Water treatment structures
Car parks
Available in strength classes from C30 to C70
Flexural strength from: 5 N/mm2
High early strength by request: less than 30 N/mm2 at 24 hours
Fully compliant with BS 8102 type A & B construction
Reduces installation time
Is not sensitive to weather conditions unlike membrane solutions
Available as a pumpable or flowing mix in slump and flow grades
Reduced installation costs
Over 78 plants across the UK with highly skilled operational teams that can support any project and ensure great end results.
All our products are thoroughly tested to ensure continued performance in strength, durability and additional properties.
Passionate about reducing our carbon footprint, we over carbon reduction alternatives and carbon offsetting facilities.
With consistent great customer feedback we always aim to deliver to time and meet your needs with possible same day deliveries on request.
Expert advice from our operational specialists to support your project.
You can not see into the concrete mixer drum but our drivers will be happy to run a small amount of concrete down the lorry shoot so you can have a quick look at the consistency. Please be mindful this is only possible if you are offloading the truck as a 'straight tip' into an area or you place a wheelbarrow under the shoot to catch the test concrete. Read our how-to on the day of delivery for more information.
No, we only provide the pre-mixed concrete to you on our mixer truck. The offload and laying of the concrete would be down to you. You may already have a builder for this or may need to hire someone. Alternatively, you may decide to do the work yourself with help from friends or family. If this is the case please look at our How to guides for assistance and please thoroughly read and watch our concrete Health & Safety information.
Should you have any queries relating to our online ordering site please Call Us, or Contact Us via the website. You can also talk to us using the online Live Chat option.
Before you start your project, please read the How to guides to ensure you are fully prepared with everything you need for the job. If you are unsure of anything, please contact us and one of our team will be happy to help where they can.
For truck dimensions, please visit our truck dimensions page. This will help you to decide whether our vehicle will safely fit onto your site. If the truck appears too big for your job, don't worry, there are other options for offloading your concrete, such as via a concrete pump, which we can discuss with you.
Our normal delivery hours are between 07:00 - 17:00, Monday to Friday & 07:00 - 12:00 on Saturdays (subject to delivery area). You will be able to request a time slot when placing your order, and we endeavour to meet that time slot, although we do usually require a minimum of 24-48 hours notice for delivery. Often we can do same day deliveries, should you require this service please contact us and our sales team will do their very best to make this happen for you. Equally, please feel free to chat online to a member of our team.
The chemical reaction that takes place within a concrete mix begins as soon as the cement and water are mixed together. This means that dependant on the travel time from our concrete plant to your delivery location, usually you will have between 1 – 2 hours once the concrete arrives on your job to place, level, compact and finish the mix. Higher strength mixes will generally give a little less working time than lower grades. Please ensure you have enough people to complete your project on time. We do offer high performance products which gain early high strengths, when faster strength gains are required. If you’re unsure about any of this information please refer to our How to guides or contact us.
A refund will be made to the payment card that was initially used to make the purchase, usually within 3-5 business days of being initiated. For any questions please contact us.
Exposure to wet concrete can result in skin irritation or even first, second- or third-degree chemical burns. It is important to always wear full PPE. If your skin comes into contact with wet concrete wash with water immediately and seek medical advice. Read our H&S guidance for further support.
Wearing the right clothing to handle concrete is highly important and essential for your safety. You may be refused on site without the correct PPE with you. Minimum levels of correct PPE should be worn by everyone involved in the laying of the concrete delivery.
MINIMUM PPE:
All should be worn to prevent any splashes getting on to the skin, face or eyes.
DO NOT WEAR SHORTS, SHORT SLEEVED TOPS OR OPEN SHOES LIKE FLIP FLOPS
Try our frequently asked questions, how to guides and technical support for specialist advice.
Need a quick answer? Why not reach out to our expert teams in your area.
We would love to hear from you! Send us an email for further support, feedback or guidance.